Nevada Tile Contractor License Requirements (2026 Guide)

Last updated April 2026. Verified against Nevada State Contractors Board (NSCB).

If you're a tile installer planning to work in Nevada, you're entering a true licensing state with one of the more rigorous regulatory frameworks in the West. Nevada licenses tile contractors through the Nevada State Contractors Board (NSCB) under classification C-20 Tiling, requiring 4 years of journey-level experience, two state exams, and a financial-responsibility-based bond.

The Nevada market is interesting for tile contractors. Las Vegas alone has massive ongoing residential and commercial construction, plus a constant remodel pipeline driven by aging Strip-area condos and the rapidly growing Henderson and Summerlin suburbs. Reno's Tahoe-area market produces high-end residential tile work. And Nevada's reciprocity agreements with California, Arizona, and Utah make it valuable territory for licensed tile contractors based in neighboring states.

This guide covers what Nevada tile contractors actually need to know — the C-20 specifics, costs, exam structure, bond mechanics, and reciprocity rules. Information was verified against NSCB official sources as of April 2026, but always confirm current requirements directly with NSCB before applying.

The Quick Answer

Does Nevada require a tile contractor license? Yes. Any tile contracting work valued at $1,000 or more (combined labor and materials) requires a Nevada contractor license through the NSCB. Tile contractors fall under classification C-20 Tiling.

Cost to get started: Approximately $2,500–4,500 first year, including application fee ($300), exam fees ($140 for both), license fee ($600), surety bond ($300–1,500/year depending on monetary limit), and general liability insurance ($800–1,400/year).

Time to get licensed: 6–10 weeks total — including application processing (typically 2–4 weeks), exam scheduling, and final licensing steps.

Required exams: Yes. Two exams: Business and Law (CMS exam) and C-20 Tiling trade exam. Both administered by PSI Testing.

Experience required: 4 years of journey-level experience in tile work within the past 10 years (verify current rules with NSCB).

Renewal: Every 2 years.

Nevada is moderately rigorous — slightly less than California (no sworn 4-year journey-level Certifier required), but more involved than Utah, Washington, Idaho, or Montana because of the higher experience requirement and variable bond.

Nevada's State Contractors Board (NSCB) System

Nevada licenses contractors through the NSCB, which operates as an independent state agency funded entirely by license fees (not state general funds). The NSCB maintains two offices:

• Southern Nevada (Henderson): 2310 Corporate Circle, Suite 200, Henderson, NV 89074 — Phone: (702) 486-1100
• Northern Nevada (Reno): 9670 Gateway Drive, Suite 100, Reno, NV 89511 — Phone: (775) 688-1141

What this means for tile contractors:

• True licensing. NSCB validates trade competency through the C-20 trade exam, not just business knowledge.
• Real experience required. 4 years of journey-level experience verified through documentation.
• Variable bond requirement. Bond amount ranges from $1,000 to $500,000 based on your contract monetary limit and financial responsibility.
• Real enforcement. NSCB has investigators and actively pursues unlicensed contracting cases.
• Public discipline records. NSCB maintains a public lookup tool with complaint and discipline history visible even after license reinstatement.

The NSCB licenses contractors across A (General Engineering), B (General Building), and C (Specialty) classifications. The C-20 Tiling classification is one of dozens of specialty trades.

The C-20 Tiling Classification

Nevada Administrative Code 624.370 defines the C-20 classification:

> "A person who holds a classification C-20 license may install, by means of suction and adhesives, ceramic tile, encaustic tile, vitreous tile and other tile-like products except for hollow or structural partitioning tile."

In practical terms, C-20 covers:

• Ceramic tile installation
• Encaustic tile installation
• Vitreous (porcelain) tile installation
• Stone tile installation (marble, granite, slate)
• Tile-like products installation
• Surface preparation related to tile installation
• Adhesive application, cutting, and grouting

C-20 Subclassifications

The NSCB allows two specific subclassifications within C-20:

C-20a — Plastic Tile and Wallboard: The cutting, forming, fitting and installing of tile and board used to cover surfaces for waterproofing or decoration within structures. Includes plastic-coated tile, hardboard, fiberglass, and similar materials.

C-20b — Swimming Pool Tile and Coping: Installation and repair of decorative coping stones and ceramic tile on swimming pools and spas. (Important in Nevada's pool-heavy residential market.)

A primary C-20 license holder can perform any work authorized under both subclassifications. You don't need to apply for C-20a and C-20b separately if you hold the primary C-20 license.

What C-20 doesn't cover

The C-20 classification stays in its lane:

• Plumbing work (drain modifications, shower valves) — requires C-1 plumbing contractor
• Electrical work (heated floor cables) — requires C-2 electrical contractor (See: How to price tile over radiant heat.)
• Hollow or structural partitioning tile — explicitly excluded from C-20
• Major masonry — requires C-4 masonry contractor

Ceramic tile and marble are also explicitly excluded from C-3b Finish Carpentry and C-16 Floor Covering classifications — meaning a flooring contractor cannot install your tile, and you cannot do their work.

This last point is important: Nevada strictly enforces classification boundaries.

What It Costs to Get Licensed in Nevada

Here are the actual costs as of 2026, broken down honestly.

Application and licensing costs

• Non-refundable application fee: $300 (paid at submission)
• Exam fees (administered by PSI):
• Both exams scheduled together: $140
• Scheduled separately: $95 each ($190 total)
• Initial biennial license fee: $600 (paid after passing exams and before license issuance)

Bond costs (variable)

Nevada's bond system is unique. The bond amount is determined by the NSCB based on your requested contract monetary limit — the maximum dollar value of any single project you can perform.

Monetary limit and corresponding bond range:

• $25,000 or less: Smaller bond, often $1,000–5,000
• $25,000–$500,000: Mid-range bond, typically $5,000–25,000
• $500,000–$1,000,000: Larger bond, $25,000–100,000
• $1,000,000+: Largest bonds, up to $500,000

Annual bond premium: Typically 1–3% of bond amount for good credit.

• $5,000 bond ≈ $100–200/year
• $15,000 bond ≈ $250–500/year
• $50,000 bond ≈ $750–1,500/year

Practical reality for solo tile contractors: Most start with a monetary limit around $50,000–$200,000, requiring a bond of $5,000–15,000. Annual bond cost: $100–500.

Insurance costs

General liability insurance: Not specifically required by NSCB at state level.

• BUT virtually all GCs and many homeowners require it
• Practical reality: $800–1,400/year for solo tile contractor
• Standard coverage: $1,000,000 per occurrence

Workers' compensation: Required if you have employees.

• Through Nevada-authorized providers
• Cost varies based on payroll
• Solo contractors with no employees can submit affidavit of exemption

Other costs

Nevada State Business License: $200 annual fee

• Required from Nevada Secretary of State BEFORE submitting NSCB application
• Separate from contractor license

Financial statement (CPA-prepared, varies by monetary limit):

• $25,000 or less: Self-prepared OK
• $25,000–$500,000: CPA-prepared statement ($300–1,000)
• $500,000–$1M: CPA-prepared with disclosures ($1,000–2,500)
• $1M+: CPA-prepared, reviewed, and audited ($2,500–7,500)

Realistic first-year cost breakdown

For a solo tile contractor getting their C-20 license in Nevada with a $100,000 monetary limit:

• Nevada State Business License: $200
• Application fee: $300
• Exam fees (both together): $140
• Initial biennial license fee: $600
• Surety bond first-year premium ($10,000 bond): $300
• General liability insurance: $1,100
• CPA-prepared financial statement: $500
• Exam prep course (highly recommended): $300–500

Total first-year cost: approximately $3,500

For higher monetary limits (allowing larger jobs), add several hundred to several thousand for higher bond costs and CPA fees.

This puts Nevada in the moderate-to-high cost tier:

• Less than California (~$3,000–5,500)
• More than Oregon (~$2,100) or Utah (~$1,500)
• Significantly more than Washington (~$1,150), Idaho (~$950), or Montana ($200–1,000)

How to Get Your C-20 License: Step-by-Step

Here's the actual process to become a licensed Nevada tile contractor.

Step 1: Get Your Nevada Business ID First

Before applying for your contractor license, you need a Nevada Business ID through the Nevada Secretary of State.

Process:

• Apply at nvsilverflume.gov
• $200 annual fee
• Sole proprietorships, LLCs, corporations all eligible
• Online application typical processing: 2–3 business days

Practical advice: Form an LLC. Annual cost is similar to sole proprietorship but provides liability protection. Nevada is one of the more LLC-friendly states.

Step 2: Document Your 4 Years of Experience

NSCB requires 4 years of journey-level experience (1,460 days) within the past 10 years.

Journey-level experience means:

• Working unsupervised full-time as a tile installer
• Either as an employee of a licensed tile contractor, OR
• As a self-employed tile installer with proper documentation
• As a foreman or supervising employee on tile projects
• As a contractor in similar classification

Documentation requirements:

You need a "qualifier" — the person who provides their experience to qualify the license. For solo contractors, this is you. The qualifier must be:

• An owner, officer, member, or manager, OR
• A W-2 employee in a management position

Acceptable proof of experience:

• W-2s and tax returns showing tile-related employment
• 1099s and tax returns for self-employment
• Sworn statements from licensed contractors who employed you
• Project records and contracts (for self-employed)
• Apprenticeship completion certificates
• Master's certifications in tiling from recognized agencies

Education substitution:

• Training from accredited college, university, or board-approved program may satisfy up to 3 of the 4 required years
• You still need at least 1 year of actual journey-level tile work experience

Step 3: Complete the License Application

Download the application from nvcontractorsboard.com or apply online.

The application requires:

• Personal information (name, SSN, address)
• Business entity information and Nevada Business ID
• Qualifier information and experience documentation
• Requested classification (C-20 Tiling)
• Requested monetary limit
• Financial statement (level of detail varies by monetary limit)
• References (typically 3 from people who can attest to your work)
• Application fee ($300)

Apply via:

• Online (recommended): NSCB online portal
• Mail: Nevada State Contractors Board, 9670 Gateway Drive Suite 100, Reno, NV 89511 OR 2310 Corporate Circle Suite 200, Henderson, NV 89074
• In person: Either NSCB office

Note: Applications cannot be accepted by email.

Step 4: Submit Financial Statement

Your financial statement must be current (completed within last 6 months) and prepared based on your requested monetary limit:

• $25,000 or less: Self-prepared or CPA-prepared
• $25,000–$500,000: CPA-prepared
• $500,000–$1,000,000: CPA-prepared with disclosures
• $1,000,000+: CPA-prepared, reviewed, and audited

Practical advice: Most solo tile contractors start with $50,000–$200,000 monetary limit. Get a CPA-prepared statement. Don't try to DIY this — improper financial statements are a common reason for application delays.

Step 5: Wait for Application Review

NSCB reviews:

• Experience documentation
• References
• Financial responsibility
• Background check (run through state agencies)

Processing time: Typically 2–4 weeks. Can extend to 6–8 weeks if additional information needed.

Step 6: Receive Exam Eligibility Letter

Once your application is approved, NSCB sends an Exam Eligibility Letter with your Candidate ID Number for testing. This letter authorizes you to schedule both exams through PSI Testing.

Step 7: Schedule and Pass Both Exams

Business and Law (CMS) Exam:

• Multiple choice, computer-based
• Available daily at PSI testing centers
• Covers: Nevada construction law, business management, contracts, lien law, employment, taxes
• 70% passing score required

C-20 Tiling Trade Exam:

• 40 multiple choice questions
• 1.5 hour time limit
• 70% passing score required
• Topics covered: surface preparations, installation, adhesives, grout, finishing
• Available at PSI testing centers throughout Nevada

Cost:

• Both exams scheduled together: $140
• Scheduled separately: $95 each

Pass rate: Approximately 65–75% for first-time test takers. Higher with proper exam prep.

Recommended exam prep:

• ContractorCampus seminar for C-20
• ExamPrep.org study materials
• Self-study using Tile Council of North America Handbook (TCNA Handbook)
• NTCA Reference Manual (one of the primary references)

Step 8: Submit Final Licensing Documents

After passing both exams, NSCB sends you a final approval letter specifying:

• Required bond amount
• Final fees due ($600 biennial license fee)
• Workers' compensation requirements

You must:

1. Get your contractor license bond

Purchase from any Nevada-authorized surety company. Common providers:

• JW Surety Bonds
• Surety Bonds Direct
• BuySuretyBonds.com
• Local Nevada insurance agencies

Send the original bond to NSCB.

2. Submit workers' compensation documentation

Either:

• Certificate of workers' comp insurance (if you have employees), OR
• Affidavit of exemption (solo contractors with no employees)

3. Pay the $600 biennial license fee

Step 9: Receive Your License

NSCB issues your license and mails it to your business address. You can verify status at nvcontractorsboard.com.

You're now a licensed Nevada C-20 tile contractor.

Bond Requirements in Detail

Nevada's bond system is unique and worth understanding clearly.

The contract monetary limit

When you apply, you request a "contract monetary limit" — the maximum dollar value of any single project you can perform under your license.

Example: With a $100,000 monetary limit:

• You can take on individual projects up to $100,000
• You CANNOT take a single $150,000 project (even if you split it artificially)
• You can run multiple smaller projects simultaneously

Practical advice for tile contractors:

• Bathroom remodels typically run $5,000–25,000
• Whole-house tile work can run $20,000–75,000
• High-end residential tile projects can exceed $100,000
• Commercial tile work routinely exceeds $250,000

For most solo residential tile contractors, $100,000–$250,000 monetary limit is appropriate. For commercial work, higher limits are needed.

Bond amount based on monetary limit

The NSCB determines your bond amount based on:

• Requested monetary limit
• Financial statement strength
• Credit history
• Business experience
• Past license history

Typical bond ranges:

• $25,000 monetary limit: $1,000–5,000 bond
• $100,000 monetary limit: $5,000–15,000 bond
• $500,000 monetary limit: $15,000–50,000 bond
• $1,000,000 monetary limit: $50,000–150,000 bond

These are approximations — your actual bond requirement is determined by NSCB based on your specific situation.

Increasing your monetary limit later

You can apply to raise your monetary limit at any time:

• Permanent Raise in Limit Application: $250 application fee
• Single Project Limit Increase Application: For one specific project exceeding your current limit

Required: Updated financial statement that meets requirements for the new limit level.

Practical advice: Start with a reasonable limit ($100,000–$250,000) and grow it over time as your business expands. Don't request the maximum limit on initial application — it requires more bond, more financial documentation, and more cost upfront.

Reciprocity: A Major Advantage of Nevada Licensing

Nevada has formal reciprocity agreements with California, Arizona, and Utah for the trade exam portion of licensing.

The reciprocity agreement

Nevada will waive the trade exam and experience requirements for applicants who:

• Have been licensed in California, Arizona, or Utah for at least 5 of the last 7 years
• Hold a license in good standing (no disciplinary actions)
• Hold an equivalent classification in their home state (e.g., California C-54 ↔ Nevada C-20)
• Pass the Nevada Business and Law (CMS) exam

This is significant. If you're already a California C-54 licensed tile contractor with 5+ years in good standing, you can skip the C-20 trade exam in Nevada. You only need to pass the Business and Law exam (Nevada-specific).

What reciprocity does NOT cover

• Plumbing and electrical trades — no reciprocity
• Applicants licensed less than 5 years in qualifying state
• Applicants with disciplinary actions
• Applicants not currently licensed (must be active)
• Business and Law exam — still required regardless

Practical reality for tile contractors

If you're a C-54 California tile contractor or licensed Arizona/Utah tile contractor wanting to expand to Nevada, reciprocity dramatically reduces the licensing burden. You skip the most challenging exam (the C-20 trade exam) and only take the Business and Law portion.

This makes Nevada an attractive expansion market for licensed tile contractors in the surrounding states.

The Renewal Process

Nevada contractor licenses are valid for 2 years (biennial).

• Renewal fee: $600 every 2 years
• Continuing education: Not currently required for C-20 contractors (verify with NSCB as rules change)
• Bond renewal: Annual, separate from license renewal. Most contractors carry continuous bonds with annual premium payments.
• Insurance renewal: Annual, must remain active.
• Workers' compensation renewal: Annual if you have employees.

Critical: If your bond lapses, your license is suspended. NSCB doesn't need to hold a hearing — bond cancellation = automatic suspension.

Late renewal: Limited grace period with late fees. After extended lapse, you may need to reapply with full process.

Local Requirements: City Business Licenses

Your NSCB license covers you statewide. But virtually every Nevada city requires additional local business licenses.

Las Vegas

• City Business License required
• Annual fee approximately $200–500 based on revenue
• Apply through City of Las Vegas Business Licensing
• Higher fees in some districts
• Special permits for some commercial work

Henderson

• City Business License required
• Annual fee varies based on business type
• Apply through City of Henderson

North Las Vegas

• City Business License required
• Annual fee similar to other Vegas-area cities
• Apply through City Hall

Reno

• Business License required
• Annual fee varies
• Apply through City of Reno

Sparks

• Business License required
• Apply through City of Sparks

Carson City

• Business License required for contractors operating in Carson City
• Lower fees than Vegas-area cities

Boulder City

• Business License required
• Special considerations for work near federal lands (Lake Mead, Hoover Dam area)

Practical advice: Before starting work in any new Nevada city, call the city's business licensing office. Most can be set up online. Working without a city business license can result in fines and stop-work orders even if your NSCB license is current.

Permits: When Tile Work Requires Them

Nevada has variation in permitting requirements between cities.

Permits typically required:

• Tile work as part of bathroom remodels in many Nevada cities (especially Las Vegas)
• Plumbing modifications (drain relocation) — but plumber pulls these
• Electrical work for heated floor systems — but electrician pulls these
• Tile work on commercial properties (almost always permitted)
• Tile work on Strip-area condos (HOA requirements often add layers)

Permits typically NOT required:

• Standalone tile floor installation in existing residential
• Backsplash installation
• Standalone shower retiling without plumbing changes
• Tile repair work

Las Vegas Strip-specific considerations:

• Many Strip-area condos and high-rises have HOA approval requirements separate from city permits
• Condo board approvals can take 2–4 weeks
• Special elevator scheduling and material delivery rules
• Higher liability requirements often imposed by HOAs

Always check with both the local building department AND any HOA before starting Strip-area work.

Industry Certifications (Optional but Valued)

Beyond NSCB licensing, voluntary tile certifications help you stand out in Nevada's competitive market.

Certified Tile Installer (CTI) - CTEF

• Most recognized voluntary credential nationally
• Requires 2+ years of full-time tile installation experience as lead installer
• Multiple-choice exam plus hands-on practical test
• Cost: $400–600

In Nevada's high-end residential market (Henderson, Summerlin, Tahoe-area Reno) and commercial market (Strip casinos, hotels, resorts), CTI certification distinguishes you from contractors who just passed the C-20 exam.

NTCA Five Star Contractor

National Tile Contractors Association tier program. Useful for commercial work and high-end residential.

Manufacturer certifications

Strip-area commercial work and high-end residential often specify certified installers:

• Schluter Systems certifications
• Laticrete certifications
• Mapei certifications
• Ardex certifications

Pool tile certifications

Given Nevada's residential pool density, tile contractors who specialize in C-20b Swimming Pool Tile work can pursue:

• Pool industry certifications
• Specialty pool tile manufacturer training

What Happens If You Work Without a License

Nevada takes contractor licensing seriously.

Legal consequences:

• Misdemeanor offense
• Fines starting at $1,000 per violation
• Increased fines for repeat offenses
• Cease and desist orders

Civil consequences:

• Cannot enforce mechanic's liens (NRS 624.700)
• Cannot sue to collect payment for work performed
• Customers can sue YOU for full reimbursement
• Insurance claims may be denied

Reputation consequences:

• NSCB maintains public lookup of unlicensed contractors
• Public discipline records remain visible even after reinstatement
• Future licensing becomes harder

The bottom line: Don't work unlicensed in Nevada. The risk-reward is terrible. NSCB has investigators who actively pursue cases.

Common Questions About Nevada C-20 Licensing

Do I need a license for jobs under $1,000?

No. Nevada's licensing threshold is $1,000 in combined labor and materials. Projects at or below $1,000 don't require an NSCB license.

However, virtually every real tile job exceeds $1,000. Even backsplash work usually crosses this threshold once you include materials and labor.

What's the difference between C-20 primary and the subclassifications?

A primary C-20 license includes both subclassifications (C-20a and C-20b). You don't need separate licenses for plastic tile/wallboard work or pool tile work — they're included.

If you only do plastic tile and wallboard work, you can hold just C-20a (not the primary C-20). Same for pool tile only with C-20b. But if you do general ceramic tile installation, you need primary C-20.

Can I use my California C-54 license to work in Nevada?

Not directly. Nevada doesn't accept California licenses as automatic authorization to work. However, California C-54 holders licensed for 5+ years in good standing qualify for Nevada licensure by endorsement — meaning you skip the C-20 trade exam and only take the Business and Law exam.

How does C-20 compare to neighboring states?

| State | Tile-Specific License | Experience Required | Trade Exam | |---|---|---|---| | California | C-54 Ceramic and Mosaic Tile | 4 years | Yes (3.5 hr) | | Nevada | C-20 Tiling | 4 years | Yes (1.5 hr) | | Arizona | CR-12 or specific tile classification | 4 years | Yes | | Utah | S293 Marble, Tile and Ceramic | None* | Yes (Business/Law only) |

*Utah recently dropped experience requirements for specialty contractors.

Nevada's exam is shorter than California's (1.5 hr vs 3.5 hr) but the experience requirement is similar.

What if my qualifier leaves my business?

You have a limited time to designate a replacement qualifier or your license is suspended. The replacement must meet all qualifier requirements (experience, exam pass).

Does my license transfer if I sell my business?

The license is tied to the specific business entity. New owners need their own qualifier or must apply for new license. The license cannot transfer with a business sale.

What about pool tile work specifically?

Nevada has strong demand for pool tile contractors due to high residential pool density. The C-20b subclassification specifically covers swimming pool tile and coping work. As a primary C-20 holder, you can perform this work. Many contractors specialize in pool tile during summer months.

What's the deal with the variable bond?

Nevada's bond is set by NSCB based on your monetary limit. Lower monetary limits = lower bonds. Higher monetary limits = higher bonds.

This is different from most states (which have fixed bond amounts like California's $25K or Oregon's $20K). Nevada's approach lets new contractors start with smaller bonds and scale up as their business grows.

Can I get licensed without 4 years of experience?

Through education substitution, you can satisfy up to 3 of the 4 years with accredited construction education. You still need at least 1 year of actual journey-level tile work.

Without the experience documentation, you cannot qualify for a C-20 license through any other path. Don't fall for services claiming they can "verify" experience you don't have.

Tracking Your License Renewal: Why It Matters

Nevada contractors have multiple compliance dates that must be tracked:

• NSCB license expiration (every 2 years)
• Contractor license bond (annually)
• Nevada State Business License (annually)
• General liability insurance (annually)
• Workers' compensation (annually, if applicable)
• City business licenses (annually)
• Financial statement update (required for any monetary limit changes)

Missing any one can suspend your license. Bond lapses cause automatic suspension without notice.

Practical advice: Set calendar reminders 90, 60, and 30 days before each expiration date. Use whatever system works — calendar app, spreadsheet, contractor management software.

This is one of the things TileForeman handles automatically for tile contractors who use it. License expiration tracking with built-in reminders is part of the broader business management software built specifically for tile installers. Whether you use TileForeman or another tracking method, just don't let these dates surprise you.

How Nevada Compares: The Western States Series

| State | License Required | Bond | Exam | First-Year Cost | |---|---|---|---|---| | Washington | Registration | $15,000 | No | ~$1,150 | | Oregon | Yes (RSC) | $20,000 | Yes (16hr + exam) | ~$2,100 | | Idaho | Registration | None | No | ~$950 | | Montana | Registration only | None | No | ~$200–1,000 | | Utah | Yes (S293) | None typically | Yes (25hr + exam) | ~$1,500 | | California | Yes (C-54) | $25,000 | Yes (4yr exp + 2 exams) | ~$3,000–5,500 | | Nevada | Yes (C-20) | Variable ($1K–$500K) | Yes (4yr exp + 2 exams) | ~$2,500–4,500 |

Nevada sits right between Utah and California in rigor — and its reciprocity rules make it especially attractive as a second-state license for contractors already established in California, Arizona, or Utah.

Resources for Nevada Tile Contractors

Official state resources:

• Nevada State Contractors Board (NSCB): https://www.nvcontractorsboard.com/
• C-20 Classification details: NAC 624.370
• License Lookup: nvcontractorsboard.com
• Henderson office: 2310 Corporate Circle Suite 200, Henderson, NV 89074 — Phone: (702) 486-1100
• Reno office: 9670 Gateway Drive Suite 100, Reno, NV 89511 — Phone: (775) 688-1141

Nevada Secretary of State:

• Business ID and entity registration: nvsilverflume.gov
• Phone: (775) 684-5708

Exam testing:

• PSI Exams: psiexams.com
• Both exams: $140 together, $95 separately

Exam prep providers:

• Contractor Campus
• ExamPrep.org
• Local contractor schools

Industry organizations:

• Ceramic Tile Education Foundation (CTEF): ceramictilefoundation.org
• National Tile Contractors Association (NTCA): tile-assn.com
• Tile Council of North America (TCNA): tcnatile.com

Surety bond providers:

• JW Surety Bonds
• Surety Bonds Direct
• BuySuretyBonds.com
• Local Nevada insurance brokers

Workers' compensation:

• Nevada Department of Industrial Relations: dir.nv.gov
• Various private insurers

Tracking License Compliance with TileForeman

If you're a licensed Nevada C-20 tile contractor, you have multiple compliance dates: NSCB license renewal (every 2 years), contractor license bond (annually), Nevada State Business License (annually), insurance renewal (annually), workers' comp (if applicable), and city business licenses. Missing any one can suspend your ability to work.

TileForeman automatically tracks license expirations, bond renewals, insurance dates, and city license renewals for tile contractors, with reminders sent 90, 60, and 30 days before each expiration. It's part of the broader business management software built specifically for tile installers.

Try it free at tileforeman.com.

Keep This Information Current

Nevada's contractor licensing rules occasionally change. The licensing threshold remains at $1,000 (matching California's recent change). The NSCB recently expanded Spanish-language testing (December 2025). Future changes are likely.

This guide was last verified in April 2026 against NSCB official sources. Before taking any action based on this information:

• Verify current requirements at nvcontractorsboard.com
• Confirm fees and processes with NSCB directly at (702) 486-1100 or (775) 688-1141
• Check city-specific requirements with the local government
• Consult a Nevada construction attorney for complex situations

This article is for informational purposes only and does not constitute legal or financial advice.

This guide is part of TileForeman's state-by-state tile contractor licensing series. View licensing requirements for Washington, Oregon, Idaho, Montana, Utah, and California.